Injection molding machine L530 | ||||
A | B | C | ||
| Injection system | ||||
| Screw Dia | mm | 60 | 65 | 70 |
Draw ratio of Screw | （L/D） | 23 | 21 | 20 |
Injection Capacity | cm3 | 989 | 1160 | 1345 |
Injection weight | g | 890 | 1044 | 1211 |
Injection Pressure | Mpa | 213 | 182 | 156 |
Plasticizing Rate | g/s | 22.6 | 33.7 | 38.2 |
Screw Speed | rpm | 0-170 | ||
| Clamping System | ||||
Clamping Force | KN | 3500 | ||
Toggle Stroke | mm | 560 | ||
Internal Spur of Tie Bar | mm | 660*660 | ||
Max Mold Heigh | mm | 640 | ||
Min Mold Heigh | mm | 220 | ||
Min Mold Size | mm | 430*430 | ||
Ejection Stroke | mm | 165 | ||
Ejection Force | KN | 79 | ||
Ejector Number | n | 13 | ||
| Other | ||||
MaxPumpPressure | Mpa | 16 | ||
Motor Power | KW | 39.4 | ||
Heating Power | KW | 19.65 | ||
Size of machine | m | 6.9*1.87*2.45 | ||
Weight of machine | t | 12.5 | ||
Oil Tank Capacity | L | 520 | ||
