Injection Mold Machine L650 | |||||
A | B | C | D | ||
| Injection System | |||||
| Screw Dia | mm | 85 | 90 | 95 | 100 |
Draw ratio of Screw | （L/D） | 22.7 | 21.5 | 19.3 | 18.4 |
Injection Capacity | cm3 | 2439 | 2734 | 3046 | 3376 |
Injection weight | g | 2195 | 2461 | 2741 | 3038 |
Injection Pressure | Mpa | 232 | 207 | 185 | 167 |
Plasticizing Rate | g/s | 65.4 | 71.8 | 78.2 | 86.5 |
Screw Speed | rpm | 0-160 | |||
| Clamping System | |||||
Clamping Force | KN | 6500 | |||
Toggle Stroke | mm | 900 | |||
Internal Spur of Tie Bar | mm | 900*900 | |||
Max Mold Heigh | mm | 1000 | |||
Min Mold Heigh | mm | 300 | |||
Min Mold Size | mm | 590*590 | |||
Ejection Stroke | mm | 240 | |||
Ejection Force | KN | 210 | |||
Ejector Number | n | 21 | |||
| Other | |||||
MaxPumpPressure | Mpa | 16 | |||
Motor Power | KW | 80 | |||
Heating Power | KW | 45.1 | |||
Size of machine | m | 9.5*2.3*2.8 | |||
Weight of machine | t | 26 | |||
Oil Tank Capacity | L | 1000 | |||
