專注研發(fā)、生産多頭刀庫雕銑機，玻璃磨邊機，高光機，雕刻機，批花機等數控機床

"Fengxin CNC" will send you a set of year-end machine tool maintenance program, I hope it can help you! (Fengxin CNC sales service telephone 13412580018) machine tool maintenance is essential before the holiday, "A set of maintenance plans for you": 1. Sanitation and cleaning inside and outside the machine tool 1. Sweep the perimeter of the machine and remove chips and stolen goods from inside and outside the machine. 2. Disassemble the 3-axis chip guard and clean it thoroughly if chips have accumulated. Clean the three-axis tubing joints, three-axis limit switches, and check whether they are normal. Check that air guns must not be used during the cleaning process. 3. Clean the coolant water tank and clean the debris precipitated in the water tank to prevent the cooling pump from clogging. 4. Clean the filters of the heat exchanger, air conditioner and oil cooler of the electric cabinet. If the oil is clogged with the tuyere, it will affect its normal operation. 5. Clean the spindle fan. After turning off the machine, wipe the oil stain inside the fan with a clean rag. 6. Clean the air filter triplet, check whether the water filtration function is normal, whether there is air leakage, and whether the pressure setting is correct (the inlet pressure is set to 0.6MAP, and the spindle gas seal pressure is set. )